XP5 DeDuster
- Ideal for plastic processors
- Compact size for easy retrofitting, and lower stack up height
- Low cost, high benefit investment
- Performance you can see
The XP 5 DeDuster is designed for a product throughput of 500 – 1,000 lb/h (250 – 450 kg/h) and requires only 21.75 in (552 mm) installation height. The XP 5 is equipped with the same fan and dust collection unit as described for the RC 1.The XP 5 has one large sight window.
Excellent Cleaning Results
Ideal for plastic processors
The venturi feature combined with the strategically placed electromagnetic coil ensure that dust and streamers are separated from the pellets. The result is clean dust-free material that is required for high quality parts and low scrap rates.
Compact size for easy retrofitting, and lower stack up height
Whether you‘re planning the installation of an new line, or just want to add the DeDuster to your existing process, the small relatively small 12 inch (305 mm) height is a huge benefit. Weighing only 40 lbs (18 kg ) this DeDuster will eliminate countless bad parts. Adding a knifegate valve, rotary valve, or variable speed paddle feeder to control the product fl ow rate into the XP 5 will increase the stack up height by approximately 2 – 4″ (50 – 100mm).
Low cost, high benefit investment
Add the DeDuster to your process and greatly reduce your scrap rate which increases your bottom line.
Performance you can see
Watch the patented science work, producing better parts and eliminating waste. The XP 5 DeDuster cleaning is highly visible in the no-tools accessible window and in the clear cyclone discharge container.
